부품 정보
Sterilizer surg dress steam pres auto microcomp 38 x 20 x 20" 115v 60hz
TXT
묘사:
Surgical Dressing Sterilizer
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Cabinet
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
50.500 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
74.500 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
35.500 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
An inside measurement taken at right angles to the length of an item,in distinction from thickness.ADJT
Inside Width:
20.000 inches
MRC:
A measurement of the longest inside dimension of an item,in distinction from width.ADJU
Inside Length:
38.000 inches
MRC:
An inside measurement from the bottom to the top of an item,in distinction from depth.AFMQ
Inside Height:
20.000 inches
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
115.0 volts
MRC:
The means by which the item is heated.BDWT
Heating Method:
Steam from remote steam source
MRC:
The number of shelves furnished with the item.BGZL
Shelf Quantity:
1
MRC:
The means by which the heat is transferred.BRXN
Heat Transfer Method:
Pressure steam
MRC:
The means provided to close the opening of the item.CPMD
Closure Method:
Door hinged w/locking device
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Automatic control; microcomputer programmed; with removable tray; door locking mechanism prevents cycle operation when door is unlocked and safeguards opening if chamber pressure exceeds 1 to 4 psig; digital printer provides permanent detachable record for each cycle; requisition should state whether right or left hand door is required; exhaust system w/condenser vent 1; chamber drain 1; valves; piping heating system 1; chamber and jacket gage 1; vacuum breaker 1; thermostatic trap 1; nichkel copper alloy perforated tray 1
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, corrosion resisting
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
