TXT
묘사:
Nonmetallic Solid Wheel
MRC:
The design molded into the tire tread rubber to provide traction.AAGC
Tread Pattern:
Smooth tread
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.930 inches and 0.950 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.430 inches and 1.450 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.930 inches and 0.950 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Engine maint stand
MRC:
The weight the item can accommodate.ALDK
Load Capacity:
12500.0 pounds
MRC:
An indication of whether or not bearings are included.AWJQ
Bearings:
Not included
MRC:
A measurement taken at right angles to the length of the tread,in distinction from thickness.CCBH
Tread Width:
Between 0.510 inches and 0.530 inches
MRC:
An indication of whether or not a lubrication fitting(s) is provided.CFRY
Lubrication Fitting:
Not provided
MRC:
An indication of whether or not a soft tread feature is included.CHSW
Soft Tread Feature:
Not included
Axle Recess Diameter:
Between 0.510 inches and 0.530 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.CXQW
Hub Style:
Straight
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Actual material is nylatron gs nylon; mos2 filled type 66 extruded; compression strength is 16, 000 pounds; coefficient of friction (dry vs steel) dynamic is 0.20; continuous service temperature in air (max) is 220
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic
