부품 정보
Bearing, upper oleo (oversized) nlg
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.8300 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 5.6750 inches and 5.6770 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 4.9600 inches and 4.9630 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Kc-135 aircraft (81205) 5-83060, oleo assembly, nose landing gear
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square all corners
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Agav
MRC:
The measured distances which are characteristic of the keyway.CTNG
Keyway Dimension:
0.2490 inches internal keyway width and 0.2520 inches internal keyway width
MRC:
The measured distances which are characteristic of the keyway.CTNG
Keyway Dimension:
0.8900 inches internal keyway length
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
The internal keyways are 180 degress apart
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 630
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
17c solid, plain, no outside flanges
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
The -01 or -03 bearings replaces (98747)8020062-01 or -03 respectively for future procurement drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
