부품 정보
Cover-control wheel
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Square or rectangular recess
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
1.800 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.062 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Trapezoid, multi hole
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
2.500 inches
MRC:
An inside measurement taken at right angles to the length of an item,in distinction from thickness.ADJT
Inside Width:
1.240 inches
MRC:
A measurement of the longest inside dimension of an item,in distinction from width.ADJU
Inside Length:
2.500 inches
Hole Quantity Along Length:
2
Hole Quantity Along Width:
2
Distance Between Holes Along Length:
2.125 inches
Distance Between Holes Along Width:
1.240 inches
Distance Between Hole Centerline And First Hole Along Length:
2.250 inches
Distance Between Hole Centerline And First Hole Along Width:
1.100 inches
Distance From First Hole Centerline To End Along Length:
2.125 inches
Distance From First Hole Centerline To End Along Width:
1.450 inches
First Recess Inside Height:
0.438 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
0.125 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.500 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
C-135 aircraft
MRC:
Indicates the type of cut on the corner/s/.CKWB
Corner Cut Type:
Round
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Color is black
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic abs