부품 정보
Boot, tlm right cover
TXT
묘사:
Dust And Moisture Seal Boot
MRC:
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.ABKQ
Center To Center Distance Between Mounting Facilities Parallel To Length:
1.328 inches
MRC:
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.ABKR
Center To Center Distance Between Mounting Facilities Parallel To Width:
1.140 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.285 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.038 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.141 inches
MRC:
A measurement taken at right angles to the length of the base,in distinction from thickness.ACUU
Base Width:
3.300 inches
MRC:
The means by which the item is sealed.ACUW
Sealing Method:
Compression
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
0.440 inches
MRC:
A measurement from the bottom to the top of the body,in distinction from depth.ADAU
Body Height:
0.213 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Lldr, an/ped-1, 61c3l.
MRC:
The means of attaching the item.AXGY
Mounting Method:
Adhesive
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the base.BGKB
Baselength:
1.720 inches
MRC:
The length of a straight line which passes through the center of the two surfaces of a circular opening,and terminates at the inside circumference.BGKC
Opening Inside Diameter:
0.375 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Boot, tlm, left cover 20001768: material - butyl rubber, 40 durometer, cmi compound 840; two boots is one solid piece; acrylic adhesive, .0045" thick, with peel off backing; color black
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber body
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
34960. 2001768 mfr ref single material response body
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Thru-hole
