측정 단위:
* special requirements. EA
TXT
묘사:
Nonvehicula Universal Joint Yoke
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.938 inches
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
1.188 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
1.312 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
16
MRC:
A measurement taken at right angles to the length of a fork,in distinction from thickness.AGBT
Fork Width:
3.125 inches
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
0.344 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
0.312 inches
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
1.625 inches
MRC:
A measurement from the bottom to the top of the fork, in distinction from depth.BRGT
Fork Height:
3.344 inches
MRC:
Indicates the type of spline(s) on the end of the shaft.BTBR
Shaft End Spline Type:
Straight
MRC:
A measurement of the longest dimension from the centerline of the universal joint spider to the shaft end,in distinction from width.BTBS
Length From Universal Joint Spider Centerline To Shaft End:
5.000 inches
Bearing Recess/keyway Depth:
0.270 inches
Distance From Flange To Yoke:
3.000 inches
MRC:
Indicates the type of connection end on the item.BYRC
Connection End Type:
Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator (non-core):
Err-090
