부품 정보
Mlongitudinal hole 0.344 inch diameter, 1.875 inch depth with 0.125 inch national pipe thread for a grease fitting; 0.188 inch diameter lubricating holes are perpendicular at 90 degree angle
TXT
묘사:
Headless Straight Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Chamfered w/thru hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Both end drilled
First Hole Diameter:
0.188 inches
Second Hole Diameter:
0.188 inches
Distance From Centerline Of Hole To End Of Pin:
0.781 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
0.969 inches
MRC:
The overall dimension measured along the longitudinal axis,with terminated points at the extreme ends of the pin.ACHT
Pinlength:
Between 2.120 inches and 2.130 inches
MRC:
The overall length of a straight line which passes through the center of the pin,and terminates at the outside circumference.ACHU
Pindiameter:
Between 1.1245 inches and 1.1250 inches
First End Taper Length:
0.062 inches
MRC:
A measurement of the longest taper dimension at the second end,in distinction from width.AMFM
Second End Taper Length:
0.062 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
First End Taper Angle:
15.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches outside diameter
Second End Taper Angle:
15.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
