부품 번호:
2-0028-03345-000-024-025
TXT
묘사:
Plug-in Electronic Compon Socket
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Polyamide nylon
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Top mount w/studs
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.990 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.130 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.900 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.060 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the mounting hole(s).AEVB
Mounting Hole Style:
Four mounting holes/slots
MRC:
The maximum current which the contact may continuously carry without degradation or destruction,expressed in amperes.AFRC
Contact Maximum Current Rating In Amps:
5.0
MRC:
The element,compound,or mixture of which the contact/s/ is fabricated,excluding any surface treatment.AFRG
Contact Material:
Nickel alloy
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off. plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the contact surface.AFRH
Contact Surface Treatment:
Nickel
MRC:
The number of contacts accommodated by the item.AFRL
Accommodated Contact Quantity:
28
Center To Center Distance Between Outside Mounting Holes Along Length:
1.827 inches
Center To Center Distance Between Outside Mounting Holes Along Width:
1.140 inches
MRC:
A nominal measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AKMG
Thread Length:
0.020 inches
MRC:
The arrangement of holes in a printed circuit board provided to accommodate terminals,polarization pin,and/or center shield.AKWJ
Printed Circuit Board Hole Arrangement Style:
Twenty eight hole dimension "a" 0.600 inch
MRC:
Indicates the type of polarization used to prevent mismating.AKWN
Polarization Type:
Slot
Projection Length Below Mounting Surface:
0.200 inches
MRC:
The means of attaching the item.AXGY
Mounting Method:
Terminal and threaded stud
MRC:
Indicates the type of mounting for which the item is designed.BCNX
Mounting Type For Which Designed:
Chassis or printed circuit
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Component retaining device and zero insertion force contacts
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
80
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.060 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the contact positions.CRPY
Contact Position Arrangement Style:
Dual in-line
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf
MRC:
Indicates the type and number of terminals for providing electrical connection.TTQY
Terminal Type And Quantity:
28 printed circuit
