부품 정보
Silicone rubber, ams 3207
TXT
묘사:
Nonmetallic Angle
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Angle
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
30.0 shore durometer a
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
500 pounds per square inch
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.700 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.800 inches
Left Side Flange Thickness:
0.125 inches
Left Side Flange Top Outer Radius:
0.032 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Corrosion and oil resistant and low temperature and heat dry and weather resistant
Fillet Radius Where Left Flange Joins Base Flange:
0.250 inches
Outer Radius Where Left Flange Joins Base Flange:
0.032 inches
Base Flange Thickness:
0.125 inches
MRC:
The style designation corresponding to the shape of the left-side flange tip.BHQU
Left-side Flange Tip Style:
Left w/inside & outside corner radi
MRC:
The style designation corresponding to the shape of the base flange tip.BHQV
Base Flange Tip Style:
Base w/upper and lower radius
