부품 번호 196B7404

Headless Shoulder Pin

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 270.06 and 364.581 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
196b7404
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
010546049

부품 정보
Vshoulder is 0.440 in. Lg, 0.245 in. Wd, with flat cut 0.350 in. Lg, 0.161 in. Dp at shaft end, shaft is centered along width, 0.174 in. From shoulder end opposite flat, shoulder is chamfered 0.040 x 45 degrees two places entire1.060 in. Lg

NSN
국가 주식 번호:
5315-01-054-6049 5315010546049
TXT
묘사:
Headless Shoulder Pin
INC
INC
아이템 이름 코드:
16749
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
1.490 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
0.190 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.550 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Both end drilled
MRC:
None.ABRC
First Hole Diameter:
0.066 inches
MRC:
None.ABRD
Second Hole Diameter:
0.064 inches
MRC:
None.ABRE
Distance From Centerline Of Hole To End Of Pin:
0.450 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
0.320 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
30.0 rockwell c and 35.0 rockwell c
MRC:
Indicates the location of the first end.CRDY
First End Location:
Shank end
MRC:
None.CRMG
First End Taper Angle:
146.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.000 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 6395 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Oxide film
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-std-171 military standard single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder

{lang[cimilar]} Headless Shoulder Pins

« Nails, Machine Keys and Pins {lang[catalog]}
지금 비교»
맑다 | 숨기다