TXT
묘사:
Steering Drag Link
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Any acceptable
MRC:
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.ABND
Taper Length:
2.063 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
1.188 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.ABQB
Taper Major Diameter:
1.125 inches
MRC:
The direction of the stud end thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ADDR
Stud End Thread Direction:
Right-hand
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
Not rated
MRC:
An indication of whether or not the item is adjustable.APCS
Adjustability:
Nonadjustable
MRC:
Designates the stud thread diameter and number of threads per specific measurement scale.AQLF
Stud Thread Size:
5/8-18
MRC:
The structural characteristic of the item.ARQS
Construction:
Solid
MRC:
Indicates the type of end connection.AWZY
End Connection Type:
Ball stud
MRC:
A measurement of the relative angular position of the connecting centers,expressed in degrees.BDSC
Connecting Centers Relative Angular Position In Deg:
270.0
MRC:
The number of bends in the item.CFCR
Bend Quantity:
2
MRC:
The distance from the centerline of the ball stud to the threaded end.CFCT
Distance From Ball Stud Centerline To Threaded End:
3.375 inches
MRC:
The center to center distance between the connecting centers.CFDC
Center To Center Distance Between Connecting Centers:
15.500 inches
MRC:
The distance from the connecting center to the opposite end.CFDD
Distance From Connecting Center To Opposite End:
Any acceptable
MRC:
An indication of whether or not a rod end lock clamp is included.CFDF
Rod End Lock Clamp:
Not included
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specified diameter of a stud end.CMLD
Stud End Thread Series Designator:
Unf
MRC:
A measurement of the extent of threads,including incomplete threads,of a stud end measured along a line parallel to the longitudinal axis.CMLJ
Stud End Thread Length:
0.875 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The physical configuration of the item.SHPE
Shape:
Bent
