MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Webbed, offset, solid
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
18.1500 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
121
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Tapered w/keyway first end
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Tapered keyway
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
18.4360 inches
MRC:
Indicates the type of teeth included on the item.CWMW
Teeth Type:
Single helix
MRC:
An indication as to whether the teeth are a standard depth or modified to a shorter depth.CWNH
Tooth Form:
Standard
MRC:
The direction the teeth curve when viewed from the edge of the item.CWNM
Tooth Direction:
Left
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
14.5000 degrees
MRC:
The measurement of the helix angle on the item.CWPZ
Helix Angle:
17.7498 degrees
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
1.313 inches first end
MRC:
The nominal distance between the body face and the recessed hub end.CWQR
Distance Between Body Face And Recessed Hub End:
1.1875 inches second end
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
2.9999 inches
MRC:
A nominal measurement taken at right angles to the length of a keyway,in distinction from thickness.CWSN
Keyway Width:
0.6260 inches first end
MRC:
The nominal distance from the center of the bore to the bottom of the keyway(s).CWSR
Distance From Bore Center To Keyway Bottom:
1.4453 inches first end
MRC:
The nominal length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.CWSW
Taper Major Diameter:
2.2505 inches first end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.CWTR
Hub Style Designator:
Plain both ends
MRC:
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.CWTX
Hub Diameter:
5.0000 inches both ends
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-890, alloy no. 1 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
One protruding hub, one recessed hub
