TXT
묘사:
Rigid Shaft Coupling
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.818 inches through bore and 0.821 inches through bore
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.904 inches through bore and 0.913 inches through bore
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.546 inches and 1.552 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
27 through bore
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
Between 1.060 inches and 1.070 inches
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Splined through bore
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.000 through bore
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
1.546 inches through bore and 1.552 inches through bore
MRC:
Indicates the type of spline provided.AXYS
Spline Type:
Involute through bore
MRC:
The chemical compound or mechanical mixture properties of which the body is fabricated.CQRG
Body Material:
Steel comp 4340
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66 federal standard 1st material response or aisi/sae 4340 assn standard 2nd material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain sleeve
