부품 정보
Rod end, threaded, spring dampener
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a body
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand body
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.875 inches body
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
1.312 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 0.865 inches and 0.875 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.438 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.379 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
C-17a aircraft
MRC:
The distance laterally from tip to tip of the fork.AJSD
Fork Span Width:
Between 0.196 inches and 0.201 inches
Distance From Pivot Pinhole Center To Rod Connection End:
2.000 inches
Fork Arm Thickness:
0.900 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
0.688 inches
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.500 inches body
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
This has inside threads of the rod part size is as follows; 0.272 minumim and 0.280 maximun, threads 0.312-24 unjf-3b perfect thread depth 1.14
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Clevis
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unjf body
