TXT
묘사:
Rod End Connector
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3b rod connection
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand rod connection
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
1.420 inches rod connection
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the outside circumference.AGGZ
Shank Outside Diameter:
0.438 inches
MRC:
A measurement of the smallest dimension of a tongue,in distinction from length or width.AHHF
Tongue Thickness:
Between 0.194 inches and 0.204 inches
MRC:
The length of a straight line which passes through the center of a securing pin hole,and terminates at the circumference.AKYE
Securing Pin Hole Diameter:
0.063 inches
MRC:
The distance along a straight line from the rod connecting end at right angle to the geometric axis of the securing pin hole center.AKYH
Distance From Center Of Securing Pin Hole To Rod End:
0.250 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the shank.ATCG
Shanklength:
1.500 inches
MRC:
The distance from the end of the item to the center of the hole.BFKT
Distance From End To Hole Center:
1.880 inches
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.250 inches rod connection
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unjf rod connection
