측정 단위:
* special requirements. EA
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain, solid
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
Between 2.7212 inches and 2.7222 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
196
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
0.405 inches
MRC:
An indication as to whether the teeth are a standard depth or modified to a shorter depth.CWNH
Tooth Form:
Standard
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
20.0000 degrees
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
0.312 inches first end
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
0.093 inches
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
0.250 inches both ends
MRC:
A nominal measurement of the longest dimension of the end of the item,in distinction from width.CWWH
End Length:
0.275 inches first end
MRC:
The quality designation of an item as determined by industry,association,or manufacturer standards.CWWK
Precision Classification:
Quality number 10 or quality number 11
MRC:
The nominal length of a straight line which passes through the center of the end of the item,and terminates at the circumference.CWWN
End Diameter:
0.313 inches first end
MRC:
A nominal measurement of the longest dimension of the first step,in distinction from width.CWWS
First Step Length:
0.037 inches first end
MRC:
The nominal length of a straight line which passes through the center of the first step,and terminates at the circumference.CWXB
First Step Diameter:
0.435 inches first end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-225/8, t6 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Protruding hub
