부품 정보
Clip top corners are radiused at 0.031 in. Min.-0.070 in. Max. On a 19.0-21.0 deg. Angle; clip ends at opening turn outward at 14.0-16.0 deg. From clip center line; clip grip dia. At closure is 0.141 in. Min.-0.180 in. Max.; clip top is radiused on all four corners at 0.016 in. Min.-0.062 in. Max., at 0.062 in. Min.-0.125 in. Max. From length edge and 0.013 in. Min.-0.188 in. Max. From width edge; mounting holes are centered at 0.240 in. Min.-0.281 in. Max. From length edge and 0.100 in. Min.-0.141 in. Max. From width edge; unit is heat treated per mil-h-6875, soln and age hardened to 33-38 rockwell c
TXT
묘사:
Spring Tension Clip
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 0.531 inches and 0.594 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.891 inches and 1.010 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.030 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 0.490 inches and 0.547 inches
MRC:
The means of attaching the item.AXGY
Mounting Method:
Unthreaded hole
Distance From Loop Center To End:
Between 0.719 inches and 0.781 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Dtd 189 mfr ref single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-std-171, finish no. 5.4.1 military standard single treatment response
