MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Round
MRC:
A measurement of the smallest dimension of the wall,in distinction from length or width.AAGT
Wall Thickness:
0.085 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
3.140 inches first end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Plain both ends
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Ozone resistant
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
2.690 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Fiberglass 1st ply and rubber chloroprene class cr 1st ply
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Fiberglass 2nd ply and rubber chloroprene class cr 2nd ply
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Fiberglass 3rd ply and rubber chloroprene class cr 3rd ply
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Fiberglass 4th ply and rubber chloroprene class cr 4th ply
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Fiberglass cover and rubber chloroprene class cr cover
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Sleeve section
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
70210-171856 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
