부품 정보
Adapter, depot, analog, aiff cit power supply
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
13.500 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
10.600 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
15.000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F-16a, b, c, d
MRC:
The means used for connecting the item to be tested.AZGL
Test Item Connection Method:
Cable
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Adapter provideswiring between the sru mating connector and fixed circuit connections of the analog test station. Load, signal conditioning circuits and special switching circuits for the sru and /or analog test station. Input circuit paths (station to sru) for power, stimuli, signal sequencing and conditioning to satisfy the sru's input test requirement. Output circuit paths (sru to station) for signal analysis, voltage amplitude measurements. Load, signal conditioning, etc. To verify sru operations and isolate malfunctions
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
Used to provide electrical and mechanical interface between sru and the analog test station
MRC:
Literature and references available for information pertaining to the item.RDAL
Reference Data And Literature:
Serd no. 0017
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
1an adapter self test will be performed on all active adapter components to verify functional operation. The adapter self test may be performed prior to execution of the sru test program with the adapter properly connected to the test station
