부품 정보
1.750-16 unef-3a threads 0.235 in. Lg top of head; 0.312 in. Diameter hole, 1.500 in. Dp centered in end; 2 parallel flats 0.350 in. Lg 0.050 in. Dp under head
TXT
묘사:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Double chamfer
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.610 inches and 0.611 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
1.004 inches
Undercut Diameter:
Between 0.433 inches and 0.435 inches
Under Head Length:
1.300 inches
Undercut Width:
Between 0.141 inches and 0.151 inches
First End Taper Length:
0.100 inches
First End Taper Angle:
30.0 degrees
Pin Head Diameter:
2.000 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.700 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Fms-1011, 81755 mfr ref single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
