부품 정보
Door, exhaust-jet engine fuel starter, assy
TXT
묘사:
Aircraft Access Door
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Arched
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
7.222 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
11.900 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.750 inches
Hole Quantity Along Length:
11
Hole Quantity Along Width:
11
Distance Between Holes Along Length:
1.478 inches
Distance Between Holes Along Width:
1.630 inches
Distance Between Hole Centerline And First Hole Along Length:
1.478 inches
Distance Between Hole Centerline And First Hole Along Width:
1.630 inches
Distance From First Hole Centerline To End Along Length:
2.108 inches
Distance From First Hole Centerline To End Along Width:
2.070 inches
Corner Hole Centerline Radius:
0.114 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
56.000 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
1.730 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Hinge and threaded fastener
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F-16
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Jet fuel starter exhaust; c/o: 1 shaft, 1 skin, 6 shims, 1 ar primer, 5 bushings, 1 housing, 1 hinge, 1 cam, 3 flanges, 79 washers, 2 pins, 59 nuts, 8 rivets, and 33 bolts
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 321
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-6721 military specification single material response
