부품 정보
Rh lower strake fs190 to fs217
TXT
묘사:
Aircraft Access Door
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Arched
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
23.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
26.000 inches
Hole Quantity Along Length:
10
Hole Quantity Along Width:
11
Distance Between Holes Along Length:
2.920 inches
Distance Between Holes Along Width:
1.564 inches
Distance Between Hole Centerline And First Hole Along Length:
1.080 inches
Distance Between Hole Centerline And First Hole Along Width:
2.660 inches
Distance From First Hole Centerline To End Along Length:
1.640 inches
Distance From First Hole Centerline To End Along Width:
2.270 inches
Corner Hole Centerline Radius:
0.125 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
3.137 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.550 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Hinge and turnlock fastener
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F-16
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024 and aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/4 federal specification 1st material response and qq-a-250/11 federal specification 2nd material response
