부품 정보
4first leg has 5 holes: 2 holes, 0.250 in. Dia, center-to-center distance between holes 4.125 in.; 2 holes directly below, 0.376 in. Min, 0.396 in. Maximum dia, center-tocenter distance between holes 4.125 in.; 1 hole, 0.125 in. Dia, hocated at dead center
MRC:
The process used in manufacturing the item.AARN
Fabrication Method (non-core):
Cast
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Counterbored
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
2.375 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
2.438 inches
MRC:
The means provided to add strength and/or protection to the item.AFPW
Reinforcement Method (non-core):
Web center section
Second Leg Width:
5.500 inches
Second Leg End Width:
2.750 inches
Second Leg Hole Diameter:
Between 0.875 inches and 0.877 inches
Second Leg Distance From Edge To Hole Center Along Width:
2.750 inches
Second Leg Distance From Edge To Hole Center Along Length:
1.062 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.500 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.375 inches
First Leg Width:
5.500 inches
First Leg Corner Radius:
0.250 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Square and tapered
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
One hole
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
First leg has 5 holes: 2 holes, 0.250 in. Dia, center-to-center distance between holes 4.125 in.; 2 holes directly below, 0.376 in. Min, 0.396 in. Maximum dia, center-tocenter distance between holes 4.125 in.; 1 hole, 0.125 in. Dia, hocated at dead center
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 535.0
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-i-8625, type 2 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
