부품 정보
First end cross drilled through 0.1265 - 0.1270 in. Dia, 0.16 in. Cen-to-end; hardness rc43-48; feedback shaft part of clutch assembly p/n 131d5030
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Slotted
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
External threaded
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
4.920 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Power unit 131d5023g02 for j85-ge-5/-13 aircraft engine
First End Slot Width:
Between 0.1260 inches and 0.1280 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.2780 inches and 0.2810 inches
First End Slot Depth:
0.4100 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.2435 inches and 0.2500 inches
Second End External Thread Length:
0.4000 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
2
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 0.278 inches and 0.281 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams6414 assn standard single material response
