MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Bearing seat
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Plain
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.155 inches and 0.165 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Various c5
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.245 inches and 0.255 inches
First End Bearing Seat Length:
0.060 inches
MRC:
The length of a striaght line which passes through the center of the first end bearing seat,and terminates at the circumference.AMEL
First End Bearing Seat Diameter:
Between 0.450 inches and 0.460 inches
MRC:
The measured distance of the first end from the bearing seat to the end.AMEP
First End Distance From Bearing Seat To End:
0.020 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.24 inches and 0.26 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
1
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 0.450 inches and 0.460 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Shaft has a 0.030 inch diameter through hole. Shaft is passivated per mil-s-5002.
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763, condition h federal specification single material response
