부품 정보
Shaft angle 10 degrees 1.58 in. From link end; hole through both walls of shaft hole end 0.0930 - 0.0955 in. Diameter in line
TXT
묘사:
Remote Control Lever
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.4365 inches and 0.4380 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Valve actuator p/n 107796a121; b-1b aircraft fuel system
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Plain straight
Center To Center Distance Between Link And Shaft Holes:
Between 2.310 inches and 2.400 inches
Shaft End Thickness:
Between 0.166 inches and 0.172 inches
Link End Thickness:
0.169 inches
Link End Hole Diameter:
Between 0.115 inches and 0.135 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/4, t4 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Offset, one hole link end
