TXT
묘사:
Cellular Plastic Material
MRC:
An indication of whether or not an object will remain substantially unchanged when subjected to extremely high temperatures.AAAU
Fire Retarding Characteristic:
Not fire retarding
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
16.730 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
6.720 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
21.620 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft, thunderbolt ii, a-10
MRC:
The condition of the item with respect to the texture of the surface.APEA
Surface Condition:
Rough
MRC:
An indication of the rated density of the item.BDNZ
Density Rating:
1.2 pounds per cubic foot
MRC:
The squeezing load an item can withstand without breaking at 25 percent deflection.CTLY
Compression Strength At 25 Pct Deflection:
0.35 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Roughly rectangular: left/short edge tapers 1.00 at bottom edge & has 2 cutouts: 2.00wx0.50h, 4.08 & 11.84 from bottom; bottom edge has cutout: 15.92wx0.58h, 5.72 from left; far side: surface is curved with radius of 40.28 from thickness of 6.72 along bottom edge to 2.50 thick along top; near side: has cuts 1.91 inches deep, 3.00 from bottom at left edge horizontally 9.25 inches then down to bottom edge and 1.91d, 11.25 from left, at bottom edge, up to 5.75 from bottom cutout, then over to right edge, & 1.91d , 2.00 above last line lengthwise to opposit edge; near side is marked "fwd" near top left corner, "up" & "inbd" near top right corner & part number near bottom right corner
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyurethane
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Material to be reticulated foam per sm-alc specification ms-mmrs-87-100
