TXT
묘사:
Cellular Plastic Material
MRC:
An indication of whether or not an object will remain substantially unchanged when subjected to extremely high temperatures.AAAU
Fire Retarding Characteristic:
Not fire retarding
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
26.110 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
4.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
38.140 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft, thunderbolt ii, a-10
MRC:
The condition of the item with respect to the texture of the surface.APEA
Surface Condition:
Rough
MRC:
An indication of the rated density of the item.BDNZ
Density Rating:
1.2 pounds per cubic foot
MRC:
The squeezing load an item can withstand without breaking at 25 percent deflection.CTLY
Compression Strength At 25 Pct Deflection:
0.35 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
5rectangular with 2 circular cutouts with radii of 7.00 inches, one centered 38.14 inches from right/short edge & 13.06 from bottom; other, 16.88 from right & 15.31 from bottom; a cutout from bottom right corner, 4.50wx5.00h, which then winds up & to the left, ending in circle with 1.75 radius, centered 22.12 from right - see drawing for details; also 2 grooves 2.00 inches deep: one 1.12 from outer edge, extending upward from cutout, ending in circle with 1.75 radius centered 17.51 from bottom & 2.87 from right edge, the other extending at 45 degree angle from perpendicular turn in cutout downward toward bottom edge; near side is marked "fwd" & "up" on 2 lines, crosswise, near center of left edge & with part number, lengthwise, in upper left corner
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyurethane
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Material to be reticulated foam per sm-alc specification ms-mmrs-87-100
