부품 정보
There is 0.045-0.055 cut through one wall only with a maximum gap of 0.02 at a 10-15deg angle on the non flanged end
TXT
묘사:
Nonmetallic Bushing
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.980 inches and 1.020 inches
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK
Flange Diameter:
Between 2.160 inches and 2.180 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
Between 2.090 inches and 2.110 inches
MRC:
A measurement of the longest dimension of the body,in distinction from width.ADAQ
Body Length:
Between 0.210 inches and 0.230 inches
MRC:
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.ADYT
Center Hole Diameter:
Between 1.360 inches and 1.370 inches
MRC:
A measurement from the bottom to the top of a flange,in distinction from depth.AHGD
Flange Height:
Between 0.100 inches and 0.140 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Single centrally located hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round flanged
