MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Recess, same shape as the periphery
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.218 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
12.200 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.125 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
11.450 inches
Hole Quantity Along Length:
6
Hole Quantity Along Width:
2
Distance Between Holes Along Length:
2.125 inches
Distance Between Holes Along Width:
11.313 inches
Distance From First Hole Centerline To End Along Length:
0.790 inches
Distance From First Hole Centerline To End Along Width:
0.260 inches
First Recess Inside Height:
1.000 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.125 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Hx unique
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Cover has 6 unthreaded holes on one side along length edge, with the distance between first two holes being 1.563 inches; has 2 unthreaded holes located .0750 inches from width edge and spaced 8.000 inches apart along length edge; corners on the two hole edge are cut away; material is lexan
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polycarbonate
