부품 정보
Seal plain encased metallic
TXT
묘사:
Plain Encased Seal
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
Between 1.623 inches and 1.627 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
200.0 degrees fahrenheit
MRC:
The length of a straight line which passes through the center of the accommodation for the shaft,and terminates at the circumference.ABVM
Accommodated Shaft Diameter:
1.625 inches
MRC:
A measurement taken between the flat surfaces /front and back/ of the seal,in distinction from thickness.ADUC
Seal Width:
Between 0.484 inches and 0.516 inches
MRC:
The maximum rated speed of the accommodated rotating shaft.AEAT
Accommodated Shaft Maximum Rated Speed:
2000 feet per minute
MRC:
The maximum pressure at which an item is rated to operate.CTQW
Maximum Pressure Rating:
20.0 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Max shaft eccentrici type 0.005 tir min shaft hardness 35 rockwell-c ident ification mark mil-std-130
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Zinc
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Iawastmb633typeiisc3 assn standard single treatment response
