TXT
묘사:
Flexible Drive Shaft
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.625 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.125 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.AGQM
Endlength:
0.844 inches
MRC:
The element,compound,or mixture of which the shaft is fabricated.ANBM
Shaft Material:
Phosphor bronze, qq-w-401 or brass, qq-b-626, comp 22, 1/2 hard
MRC:
A designation indicating the size by which the item is commercially known and/or identified.APGG
Size Designator:
0.125 in. Shaft, 0.250 in. Coupler
MRC:
Indicates the type of unit.APQB
Unit Type:
Wire wound
MRC:
Indicates the type of end.APTD
End Type:
Round female
MRC:
A measurement of the distance from one side to the opposite side of the cross section of an item and the location.CFQW
Cross Section Size And Location:
0.500 inches diameter
MRC:
The number of threaded securing holes provided.CFQY
Threaded Securing Hole Quantity:
2
MRC:
Designates the thread diameter and number of threads per measurement scale of a securing hole.CFQZ
Securing Hole Thread Size:
8-32
MRC:
Indicates the location of the threaded securing hole(s) on the item.CFRB
Threaded Securing Hole Location:
Located 90 degrees apart, 0.188 in. From end, through to bore