부품 번호 1539575

Bevel Gear

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 1688.28 and 2279.178 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
1539575
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
004900867

부품 정보
Hub end first step is threaded, 1.173-18 ns-3a; third hub step has 23 involute splines, 16/32 dp; second bore has 13 involute splines, 16/32 dp

NSN
국가 주식 번호:
3020-00-490-0867 3020004900867
TXT
묘사:
Bevel Gear
INC
INC
아이템 이름 코드:
05463
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Webbed, offset, solid
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
1.9166 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
23
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Partial both ends
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
58.0 rockwell c teeth
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
2.016 inches
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
3.750 inches
MRC:
Indicates the type of teeth included on the item.CWMW
Teeth Type:
Spiral
MRC:
The direction the teeth curve when viewed from the edge of the item.CWNM
Tooth Direction:
Right
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
20.0000 degrees
MRC:
The measurement of the pitch angle on the item.CWQD
Pitch Angle:
45.0000 degrees
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
3.621 inches second end
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
0.400 inches
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
0.938 inches second end
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
0.985 inches first end
MRC:
A nominal measurement between specified points on the bore,in distinction from height.CWRX
Bore Depth:
0.688 inches second end
MRC:
A nominal measurement between specified points on the bore,in distinction from height.CWRX
Bore Depth:
1.945 inches first end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.CWTR
Hub Style Designator:
3 steps second end
MRC:
A nominal measurement of the longest dimension of the end of the item,in distinction from width.CWWH
End Length:
0.300 inches second end
MRC:
The nominal length of a straight line which passes through the center of the end of the item,and terminates at the circumference.CWWN
End Diameter:
1.095 inches second end
MRC:
A nominal measurement of the longest dimension of the first step,in distinction from width.CWWS
First Step Length:
0.938 inches second end
MRC:
The nominal length of a straight line which passes through the center of the first step,and terminates at the circumference.CWXB
First Step Diameter:
1.173 inches second end
MRC:
A nominal measurement of the longest dimension of the second step,in distinction from width.CWXG
Second Step Length:
0.628 inches second end
MRC:
The nominal length of a straight line which passes through the center of the second step,and terminates at the circumference.CWXL
Second Step Diameter:
1.250 inches second end
MRC:
A nominal measurement of the longest dimension of the third step,in distinction from width.CWXP
Third Step Length:
0.720 inches second end
MRC:
The nominal length of a straight line which passes through the center of the third step,and terminates at the circumference.CWXT
Third Step Diameter:
1.513 inches second end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4620
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-7493, cond b1 or c1 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Peripheral face, back hub protruding

{lang[cimilar]} Bevel Gears

« Gears, Pulleys, Sprockets and Transmission Chain {lang[catalog]}
지금 비교»
맑다 | 숨기다