부품 정보
3 ea additional 0.422 in. By 0.344 in. Holes located on 3.281 in. Diameter bolt circle at 0, 90, and 270 degrees respectively
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
4.125 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.062 inches
First Hole Diameter:
2.750 inches
Second Hole Diameter:
0.172 inches
MRC:
The maximum potential gradient that the insulating material can withstand per mil /0.001 inch/ thickness without rupture.ACGY
Dielectric Material Voltage Rating Per Mil Thickness In Volts:
Not rated
First Hole Spacing:
1.640 inches
Second Hole Spacing:
3.281 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.MTLC
Material And Location:
plastic, phenolic, mil-p-15035, type fbe err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.MTLC
Material And Location:
plastic, phenolic, mil-p-15035, type fbe
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Drilled, flat
