부품 정보
Made from 005931, 1 hole 0.130-0.150 in. Diameter located 1.510x3.285 porm 0.010 in. From end, 4 holes 0.230-0.270in. Diameter located at upper rt corner in square configuration 0.800 in. C to c, 4 holes 0.500 in. Diameter located in pairsat 45 degrees on opposite sides of an intersecting bolt circle 1.000 in. Dia
TXT
묘사:
Electronic Shielding Gasket
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.230 inches and 0.270 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 7.800 inches and 7.840 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 3.330 inches and 3.370 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
Between 2.900 inches and 2.920 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
Between 7.370 inches and 7.390 inches
Outside Edge To Bolt Hole Center Distance Along Width:
Between 0.210 inches and 0.230 inches
Outside Edge To Bolt Hole Center Distance Along Length:
Between 0.210 inches and 0.230 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
Between 0.054 inches and 0.074 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
An/grm-113
