Slot Width:
0.040 inches single end
MRC:
The measurement between specified points of the slot,in distinction from height.AADJ
Slot Depth:
0.155 inches single end
MRC:
A measurement of the longest dimension of the terminal,in distinction from width.AAEY
Terminal Length:
0.239 inches
MRC:
The shortest straight line between the flats of a hexagonal or octagonal cross-sectional plane which is perpendicular to the height.AAGW
Width Across Flats:
0.312 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.AAJT
Overall Height:
0.630 inches
MRC:
The largest measurement taken at right angles to the length of the item,in distinction from thickness.AALB
Largest Width:
0.125 inches single end
MRC:
The feature consisting of sleeves,covering,caps,mounting bushings and the like,used to electrically insulate an item.AALV
Electrical Insulation Feature:
Standoff insulation
MRC:
The style designation indicating the configuration that most nearly corresponds to the mounting method of the item.AALX
Mounting Method Style:
Tapped hole
MRC:
The length of a straight line which passes through the center of the threaded mounting,and terminates at the circumference.AAMP
Mounting Thread Diameter:
0.112 inches
MRC:
The electrical potential which will cause a disruptive discharge over a dry insulator,expressed in volts.AAPA
Dry Flashover Voltage Rating In Volts:
3000.0
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.ABET
Thread Length:
0.062 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the basic appearance of the item.AGTA
Basic Shape Style:
Nontubular, hex
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of specific diameters of a threaded mounting.ATGD
Mounting Thread Series:
Unc
MRC:
Indicates the type of connector or conductor accommodation included on the item.CSFJ
Conductor Accommodation Type:
Bifurcated u-fork single end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Alumina insulation
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy except insulation
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-i-10-l624 military specification single material response insulation
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-b-626 federal specification single material response except insulation
MRC:
An indication of the precious material and its location in the item.PMLC
Precious Material And Location:
Finish o/a except insulation first layer silver and finish o/a except insulation second layer gold
MRC:
An indication of the precious material contained in the item,and the amount per a measurement scale.PMWT
Precious Material And Weight:
0.040 silver grains, troy and 0.040 gold grains, troy
MRC:
Identification of the precious material contained in the item.PRMT
Precious Material:
Gold and silver
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Gold except insulation second layer
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Silver except insulation first layer
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-g-45204, type i or ii, grade c, class oo military specification single treatment response except insulation second layer
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-s-365, type iii federal specification single treatment response except insulation first layer
