TXT
묘사:
Plug-in Electronic Compon Socket
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Plastic
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Top mount w/metal saddle and shield base
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.125 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
100.0 degrees celsius
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.188 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.890 inches and 0.910 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.120 inches and 0.130 inches
Body Mounting Hole Accommodation Diameter:
0.625 inches
MRC:
The distance between mounting facility centers.AEJN
Distance Between Mounting Facility Centers:
Between 0.870 inches and 0.880 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the mounting hole(s).AEVB
Mounting Hole Style:
Round, w/two mounting holes
MRC:
The opposition to the flow of current through mating contacts of an item,expressed in ohms.AFDM
Contact Resistance In Ohms:
0.030
MRC:
The name of the equipment the item is specifically designed to accommodate.AFJE
Specific Equipment Accommodated:
Electron tube
MRC:
The maximum current which the contact may continuously carry without degradation or destruction,expressed in amperes.AFRC
Contact Maximum Current Rating In Amps:
1.0
MRC:
The element,compound,or mixture of which the contact/s/ is fabricated,excluding any surface treatment.AFRG
Contact Material:
Phosphor bronze
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off. plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the contact surface.AFRH
Contact Surface Treatment:
Silver
MRC:
The number of contacts accommodated by the item.AFRL
Accommodated Contact Quantity:
7
MRC:
The means of attaching a component shield.AKWK
Component Shield Mounting Method:
Bead
MRC:
Indicates the type of polarization used to prevent mismating.AKWN
Polarization Type:
Slot
Projection Length Below Mounting Surface:
0.563 inches
MRC:
The means of attaching the item.AXGY
Mounting Method:
Saddle
MRC:
Indicates the type of mounting for which the item is designed.BCNX
Mounting Type For Which Designed:
Chassis
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Center shield
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the contact positions.CRPY
Contact Position Arrangement Style:
Miniature
MRC:
The maximum potential,expressed in volts,and the current type that may be applied continuously to the contacts without damage.CSKW
Contact Maximum Voltage In Volts And Current Type:
500.0 ac and 500.0 dc
MRC:
An indication of the precious material and its location in the item.PMLC
Precious Material And Location:
Contact surfaces silver
MRC:
An indication of the precious material contained in the item,and the amount per a measurement scale.PMWT
Precious Material And Weight:
0.007 silver grains, troy
MRC:
Identification of the precious material contained in the item.PRMT
Precious Material:
Silver
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-s-12883 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
MRC:
Indicates the type and number of terminals for providing electrical connection.TTQY
Terminal Type And Quantity:
8 tab, solder lug
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81349-mil-s-12883 government specification
