부품 정보
Navy wsdc jkn, wasp class lhd
MRC:
The number of prime movers incorporated in the unit.AAXH
Prime Mover Quantity:
1
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Submersible and fungus resistant and spray tight
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Wasp class lhd
MRC:
The maximum height the item is capable of raising an object.AGBP
Maximum Lift Height:
30.0 feet
MRC:
Indicates the type of prime mover included with the unit.AKDJ
Prime Mover Type:
Electric motor
MRC:
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.AKNA
Inclosure Type:
Fully enclosed
MRC:
The working period under which the item was designed to operate.AKPS
Duty Cycle:
Continuous
MRC:
The means used to operate the item.APHE
Operation Method:
Powered
MRC:
The total load the item is capable of moving at selected speeds and the drum location.ATWN
Load Limit At Selected Speed And Drum Location:
12000.0 pounds single speed first drum
MRC:
The distance that the item will move per minute,per specific measurement scale.ATWP
Travel Rate Per Minute:
0.75 feet and 4.00 feet and 13.00 feet
MRC:
The means by which the braking action is applied.ATWS
Braking Method:
Electric
MRC:
The number of hooks provided.ATWT
Hook Quantity:
1
MRC:
The number of elements per hook,which are load bearing.ATWW
Load Element Quantity Per Hook:
1
MRC:
The power required to start and operate the item at rated capacity.ATYG
Power Requirement Rating:
0.50 horsepower
MRC:
The means used in the suspension mounting of an item.AWEH
Suspension Mounting Method:
Trolley
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the trolley suspension.AWEJ
Trolley Suspension Style:
Plain, wide flange i beam, flat flange
MRC:
Indicates the type of trolley provided.AWEK
Trolley Type:
Motor driven
Track Underside Distance To Load Hook Bearing Surface In Fully Raised Position:
31.250 inches
Wheel Center To Center Distance:
32.000 inches
MRC:
The installed position for which the item is designed.BBJX
Mounting Position:
Right angle
MRC:
The means of cooling used to maintain the required operating temperature of the item.BFMF
Cooling Method:
Air to air cooled
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
440.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
