부품 정보
Flexible channels with button type terminals
TXT
묘사:
Nonim Electrical Heating Element
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Band type/nozzle element
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
4
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
14.000 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
2.375 inches
MRC:
An indication of the radiation spectrum of the element.ABJA
Element Radiation Specificationtrum:
Noninfrared
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the element connection.ABJS
Element Connection Style:
Stud type
MRC:
The number of heats at which the item will operate.ABNR
Heat Quantity:
2
MRC:
The maximum rated power that an item can safely consume or provide,measured in watts.AZQH
Maximum Wattage Rating In Watts:
1500.0 single voltage
MRC:
The number of elements in the item.BHHK
Element Quantity:
1
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.190 inches stud
MRC:
The number of threads per specific measurement scale.CQRN
Thread Quantity:
32.0 per inch stud
MRC:
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.CSBH
Voltage In Volts And Current Type:
236.0 ac single voltage
MRC:
The number of alternating current phases.FAAZ
Phase:
Not rated single voltage
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Any acceptable resistance wire
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Any acceptable resistance wire embedding/support insulation
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Any acceptable sheath
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf stud
