TXT
묘사:
Nonmetallic Grommet Blank
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
60.0 shore durometer a
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
0.130 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.120 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.380 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
H-46 aircraft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the grommet.AGME
Grommet Style:
Blank
Large Flange Outside Diameter:
2.680 inches
Groove Outside Diameter:
2.430 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Insert with flange diameter of 2.680 inches; hub diameter of 2.430 inches; having a through hole of 1.640 inch diameter located 0.260 inches left of center and having a through hole of 0.390 inch diameter located 0.890 inches right of center; height is 0.380 inches with flange heights of 0.130 inches each
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-spec-a-a-59588, zz-r-765e military specification single material response
