부품 정보
Weapon system essential
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.525 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.750 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
15
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.ABSC
Spline Minor Diameter:
0.437 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Arleigh burke class ddg; close in weapon system (ciws-phalanx); aircraft, eagle f-15; forrestal class cv
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
0.150 inches
MRC:
The physical configuration of the item.ARJD
Design Form:
Plain
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Involute spline
MRC:
A numeric value,used in conjunction with a hardness rating scale,designating the metallic hardness rating and its location.ASXJ
Metallic Hardness Rating And Location:
33.0 rockwell c body and 38.0 rockwell c body
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.0
MRC:
An indication of whether or not a counterbore feature is included.AXND
Counterbore Feature:
Not included
MRC:
A measurement of the spline pitch diameter.BDTX
Spline Pitch Diameter:
0.468 inches
MRC:
An indication of whether or not a lightening hole/s/ is included.BXSJ
Lightening Hole:
Not included
MRC:
An indication of the characteristic of the protruding hub.BYDZ
Protruding Hub Characteristic:
Plain
MRC:
The number of rows of teeth provided.BYFL
Teeth Row Quantity:
1
MRC:
The number of teeth included in each row.BYFN
Teeth Quantity Per Row:
4
MRC:
The means used to test the rated hardness of an item.BYFQ
Hardness Rating Test Method:
Rockwell
MRC:
A numeric value that reflects the hardness of the teeth when used in conjunction with a hardness rating scale.BYFR
Teeth Hardness Rating:
Between 33.0 rockwell c and 38.0 rockwell c
MRC:
An indication of whether or not a bore bearing is included.BYFS
Bore Bearing:
Not included
MRC:
An indication of whether or not a hub external keyway is included.BYFW
Hub External Keyway:
Not included
Hub End Outside Diameter And Location:
0.760 inches aa end
Distance From Outside Flange/rim To Hub End And Location:
0.600 inches aa end
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, ams 5659
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp xm-12
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5659 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Passivated
