MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
Between 0.368 inches and 0.382 inches
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
Between 0.030 inches and 0.034 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
0.560 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.063 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
5.750 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.194 inches and 0.208 inches all holes
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
3
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Counterbored and unthreaded
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Gau-12/u 25mm
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
There is a hole0.375 inches from each end with the third hole in the center; all three holes are centered 0.215 inches from the long edge without the lip
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Heat treatment temper t6; one long end has a lip that curves up 90 degrees and has a width of 0.240 +/- 0.030
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 federal standard single material response
MRC:
The physical configuration of the item.SHPE
Shape:
Rectangular
