MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Circular grooved and externally threaded
First End Groove Width:
0.2500 inches
First End Groove Diameter:
1.2500 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved and externally threaded
Second End Groove Width:
0.2500 inches
Second End Groove Diameter:
1.1400 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
68.090 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
PUMP-UN-IT,-CENT
First End Distance From End To Groove:
0.5000 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
1.3750 inches
First End External Thread Length:
0.5000 inches
Second End Distance From End To Groove:
1.2500 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
1.2500 inches
Second End External Thread Length:
1.2500 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
15
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
3.1250 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 410
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763, cl. 410, cond. T-hf federal specification single material response
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Shall not contain functional mercury and/or be contaminated by mercury or mercury compounds; certain dimensions require special documentation of inspection
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Twelve keyways and one hole; first end 1.375-12unf-3a l.H. Threads; small center drill for mfg purposes; second end 1.250-12unf-3a r.H. Threads and internally 0.484 drill-1.50 deep, 0.625 drill-0.25 deep, and 0.562-12unc-3b tap to 1.19 in
