부품 정보
Fuel bladder assembly
TXT
묘사:
Liquid Storage Tank
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 4.449 feet and 4.469 feet
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 4.197 feet and 4.219 feet
MRC:
The element,compound,or mixture of which the shell is fabricated.AEUG
Shell Material:
Fabric, nylon
MRC:
The means by which the body parts are designed to be fastened together.AFPN
Assembly Method:
Bolted
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Fuel bladder
MRC:
The physical configuration of the end/s/ of the item.AHEF
End Shape:
Cylindrical
MRC:
The installation for which the item is designed.AMQY
Installation Design:
Horizontal
MRC:
An indication of whether or not a mounting bracket is provided.AQFN
Mounting Bracket:
Not provided
MRC:
An indication of whether or not a fitting(s) is included.AYNB
Fitting:
Included
MRC:
Indicates the location for which the item is designed to be installed.AYNY
Installation Location:
Below ground
MRC:
Indicates the capacity of the tank.BSSM
Tank Capacity:
420.0 gallon, us measure
MRC:
The liquid for which the item is designed.BXHJ
Liquid For Which Designed:
Fuel oil or oil, diesel
MRC:
An indication of whether or not a two compartment feature is included.CBPX
Two Compartment Feature:
Not included
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Compatible with number 2 diesel and jp-5 jet fuel; operating depth of 70 feet of sea water (fsw) and survive at 90 fsw; has 3 stainless steel bulkhead fittings with stock gaskets
MRC:
The physical configuration of the item.SHPE
Shape:
Cylindrical
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Pressure tested from 1.8 to 2.0 psi in an unconstrained state
