부품 정보
hgt 0.37, center hole through 0.07 in. Thk, 2 holes 1.80 in. Across c-to-c 0.125 in. Dia; matl 0.010 gauge tricot jersey nylon coated on side per ams3212
TXT
묘사:
Special Actuator Valve Diaphragm
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.156 inches
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
2.220 inches
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
1.800 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.013 inches and 0.019 inches
MRC:
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.ADYT
Center Hole Diameter:
0.250 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
6
MRC:
The length of a straight line which passes through the center of a bead,and terminates at the circumference.AJXS
Bead Diameter:
1.030 inches
MRC:
The pressure at which an item is designed to operate.BGST
Pressure Rating:
90.0 pounds per square inch
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper and rubber synthetic
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Fuel, jet
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Special shaped
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Diaphragm for impeller injection spinner discharge valve
