부품 정보
1st end internal 8.0 x 8.0 mm hex hole; 2nd end 11.8 mm sphere; threaded center step 0.750-16 unf 2a; passivate surface finish iaw qq-p-35 type ii
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Circular grooved
First End Groove Width:
Between 2.90 millimeters and 3.10 millimeters
First End Groove Diameter:
Between 15.95 millimeters and 16.05 millimeters
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 56.0 millimeters and 57.0 millimeters
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Multi-launch rocket system
First End Distance From End To Groove:
Between 2.9 millimeters and 3.1 millimeters
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 19.90 millimeters and 20.10 millimeters
MRC:
The number of steps provided.ATPC
Step Quantity:
8
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 19.9 millimeters and 20.1 millimeters
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763 type 304 federal specification single material response
