부품 정보
Gpassivate iaw qq-p-35 type ii; notch 1.0 mm deep 15.0 mm from 1st end to 2.5 mm deep 25.0 mm from 1st end; woodruff key center 60.0 mm from 1st end 3.0 mm deep 3.2 mm wide; 2nd end hole threads m10x1
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Plain
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Internal threaded
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 195.5 millimeters and 196.5 millimeters
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 10.90 millimeters and 11.10 millimeters
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 15.30 millimeters and 16.30 millimeters
MRC:
A measurement of the extent of complete /full/ internal threads,along a line parallel to the longitudinal axis of the second end.AMHP
Second End Internal Thread Length:
Between 24.5 millimeters and 25.5 millimeters
MRC:
The number of steps provided.ATPC
Step Quantity:
4
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 15.3 millimeters and 16.3 millimeters
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763 type 304 federal specification single material response
