TXT
묘사:
Ball Stud Adjusting Plug
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The measurement between specified points of the slot,in distinction from height.AAZT
Slot Depth:
0.438 inches
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
0.188 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.875 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.906 inches
MRC:
A linear measurement from the surface to a specified inner point on an item,in distinction from height.AEJZ
Depth:
0.281 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Truck forklift, diesel engine driven, 6000 lb.; anthony model mlt 6-2, nsn 3930003271575
MRC:
An indication of whether or not a lubrication fitting threaded hole is included.CFDL
Lubrication Fitting Threaded Hole:
Not included
MRC:
Indicates the physical characteristic(s) of the ball seat end.CFGP
Ball Seat End Characteristic:
Drilled
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, aisi b1112 or steel, aisi c1212 or steel aisi c1215
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1211 or steel comp 1212 or steel aisi c1215
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Aisi b1112 assn standard 1st material response and aisi c1212 assn standard 2nd material response
MRC:
Designates the thread diameter,series/type,and number of threads per specific measurement scale.THDS
Thread Size And Series/type Designator:
1-9/16-16 un
