부품 정보
Gmaterial grey iron, finish chromium plate or phosphate coat dyed non-reflective black; bore tappered 4 degrees; includes two 0.375-16 unc 2b holes on 2.125 bc and one 0.391 x 0.625 in. Deep hole on 2.125 bc; o/a od 4.060 in.
TXT
묘사:
Timing Belt Pulley
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.000 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
2.250 inches
MRC:
Indicates the type of face provided.ALPN
Face Type:
Flat grooved with double flange
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
0.750 inches
MRC:
The length of a straight line which passes through the center of the hub,and terminates at the circumference.ASBM
Hub Diameter:
3.060 inches
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Tapered
MRC:
The number of grooves or teeth included on the face of the item.CYDR
Face Groove/tooth Quantity:
32
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Iron
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a48, class 30 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-14538 military specification 1st treatment response or dod-p-16232, type m, class iv military specification 2nd treatment response
