MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Threaded cross drilled
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved and flatted
Second End Groove Width:
0.0900 inches
Second End Groove Diameter:
Between 0.4550 inches and 0.4750 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.280 inches
MRC:
A measurement of the longest dimension of the flat at the first end,in distinction from width.AMCX
First End Flat Length:
0.750 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.9900 inches and 1.0100 inches
First End Distance From Hole Center To End:
0.5000 inches
MRC:
A measurement between specified points of the hole at the first end,in distinction from height.AMEB
First End Hole Depth:
0.1875 inches
Second End Flat Depth:
0.1198 inches
MRC:
A measurement of the longest dimension of the flat at the second end,in distinction from width.AMFP
Second End Flat Length:
0.7500 inches
Second End Distance From End To Groove:
0.9100 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.4995 inches and 0.4998 inches
MRC:
A measurement of the extent of complete /full/ internal threads,along a line parallel to the longitudinal axis of the second end.AMHP
Second End Internal Thread Length:
0.062 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
2
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 0.990 inches and 1.010 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1113
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Aisib1113 assn standard single material response
